Linux version 2.4.23-abako (yack@yack) (version gcc 3.3.3 20031206 (prerelease) (Debian)) #1 sam déc 13 15:08:00 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000dffc000 (usable) BIOS-e820: 000000000dffc000 - 000000000dfff000 (ACPI data) BIOS-e820: 000000000dfff000 - 000000000e000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 223MB LOWMEM available. On node 0 totalpages: 57340 zone(0): 4096 pages. zone(1): 53244 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=Linux ro root=302 pci=bios,biosirq Found and enabled local APIC! Initializing CPU#0 Detected 2018.001 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4023.91 BogoMIPS Memory: 224108k/229360k available (1472k kernel code, 4864k reserved, 542k data, 112k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2018.1357 MHz. ..... host bus clock speed is 100.9067 MHz. cpu: 0, clocks: 1009067, slice: 504533 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf1160, last bus=1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1039/0962] at 00:02.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd Journalled Block Device driver loaded sisfb: Video ROM found and mapped to c00c0000 sisfb: Framebuffer at 0xf0000000, mapped to 0xce804000, size 32768k sisfb: MMIO at 0xe7800000, mapped to 0xd0805000, size 128k sisfb: Memory heap starting at 31744K sisfb: Using MMIO queue mode sisfb: Detected SiS301C video bridge sisfb: Mode is 800x600x8 (60Hz) sisfb: Initial vbflags 0x10000124 sisfb: Added MTRRs Console: switching to colour frame buffer device 100x37 sisfb: Installed SISFB_GET_INFO ioctl (80046ef8) sisfb: Installed SISFB_GET_VBRSTATUS ioctl (80046ef9) sisfb: 2D acceleration is enabled, scrolling mode ypan fb0: SIS 650/M650/651/661FX/M661FX/740/741 VG frame buffer device, Version 1.6.16 sisfb: (C) 2001-2003 Thomas Winischhofer. All rights reserved. pty: 256 Unix98 ptys configured Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:pio, hdd:pio hda: ST380011A, ATA DISK drive hdb: ASUS SCB-2408, ATAPI CD/DVD-ROM drive blk: queue c0341e60, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-disk driver. hda: host protected area => 1 hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100) hdb: attached ide-cdrom driver. hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hda3 < hda5 > hda4 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 112k freed Adding Swap: 995988k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 15:17:22 Dec 13 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0x8000, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0x7800, IRQ 12 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller ehci_hcd 00:03.3: irq 5, pci mem d08c1000 usb.c: new USB bus registered, assigned bus number 3 PCI: cache line size of 128 is not supported by device 00:03.3 ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 6 ports detected ehci_hcd 00:09.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:09.2: irq 4, pci mem d08c3000 usb.c: new USB bus registered, assigned bus number 4 ehci_hcd 00:09.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 4 ports detected SCSI subsystem driver Revision: 1.00 Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. sis900.c: v1.08.06 9/24/2002 eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0x8800, IRQ 4, 00:0c:6e:8f:61:59. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 176M agpgart: Detected SiS 651 chipset agpgart: AGP aperture is 64M @ 0xe8000000 hub.c: connect-debounce failed, port 1 disabled kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. hub.c: new USB device 00:09.0-1, assigned address 2 scsi0 : SCSI emulation for USB Mass Storage devices Vendor: ASUS Model: USB Storage-SMC Rev: 322A Type: Direct-Access ANSI SCSI revision: 02 Vendor: ASUS Model: USB Storage-CFC Rev: 322A Type: Direct-Access ANSI SCSI revision: 02 Vendor: ASUS Model: USB Storage-MMC Rev: 322A Type: Direct-Access ANSI SCSI revision: 02 Vendor: ASUS Model: USB Storage-MSC Rev: 322A Type: Direct-Access ANSI SCSI revision: 02 WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 hub.c: new USB device 00:09.0-2, assigned address 3 usb.c: USB device 3 (vend/prod 0xbc7/0x4) is not claimed by any active driver. eth0: Media Link On 100mbps full-duplex